Products
Your basket is empty
Rubber Milk 1 kg
PAT1062
Price ex VAT: £22.92 Each
Rubber Milk is a mouldable stabilised form of natural rubber, the resulting casts are highly flexible and naturally have a slightly yellowish-milky colour.
The rubber milk can be tinted by adding up to 5% of HatoTex Paint [available to order, ask us for a swatch card].
Only cast into plaster moulds that are thoroughly dry. Please note, the rubber milk will shrink by 5-10%, so factor this into the design of the mould. Rubber Milk is quite thin already and easy to pour but if it needs to be diluted, please use a 10% Ammonia Solution.
The rubber milk can be tinted by adding up to 5% of HatoTex Paint [available to order, ask us for a swatch card].
Only cast into plaster moulds that are thoroughly dry. Please note, the rubber milk will shrink by 5-10%, so factor this into the design of the mould. Rubber Milk is quite thin already and easy to pour but if it needs to be diluted, please use a 10% Ammonia Solution.
SpecificationPour into the mould, and leave for about 15-20 minutes, until the desired wall thickness has been reached. Demould after 1/2-2 hours. Full cure after 3-12 hours depending on temperature. Higher temperatures can reduce the cure time, but temperatures should not exceed 45ºC when in the mould, and 80ºC once demoulded.